Budget 😀 PG Drives 2 Key GC2/GC3 Joystick Remote With 4 Prong Connector 🎁

2 key GC2/GC3 joystick remote with speed dial for Jazzy and Jet power chairs by Pride Mobility. Please check the Compatibility tab carefully for a full listing of compatible models. Most Jazzy models changed joystick remote connectors during their production runs.

Joystick remotes with a 3-prong connector will have a serial number of D50901 (CTLDC1461). 4-prong versions will have a serial number of D51157 (CTLDC1574). Please note that the 3-prong version has been discontinued by the manufacturer and is no longer available.

Unlike other “joystick controllers,” the GC2/GC3 joystick remote is technically a “joystick remote” due to the fact that it is used in conjunction with a separate control module.

Certain models of Jazzy Select, Select 6, and Select 6 Ultra power chairs use a GC joystick remote with a 3-prong connector which connects to the following controller:

40 Amp Controller for the Jazzy Select, Select 6, and Select 6 Ultra Power Chairs

Other Jazzy Select and Select GT models use a GC joystick remote with a 4-prong connector which connects to this controller:

40 Amp Controller for the Jazzy Select and Select GT

Control Panel Features:

On/Off Button – This button turns the GC on and off. Do not use this button to stop the wheelchair, except in an emergency.

TruCharge Battery Gauge – This is a 5 segment display which indicates if the GC is switched on and gives the state of charge of the battery. Additionally, any faults in the wheelchair’s electrical system are indicated by this display. Refer to the wheelchair’s documentation for more details.

Speed Dial – This dial adjusts the speed of the wheelchair.

Horn Button – This button operates the wheelchair’s horn.

⚠ WARNING California Residents: Proposition 65 Warning